Tiếng Việt
中文 (中国)
TONSAN TS216 Powder Wear & Gas Erosion Resistant Putty
Grey two-component epoxy reinforced with metallic carbide and ultra-hard ceramic, protecting against fine particle sliding abrasion.
- Epoxy reinforced with metallic carbide and ultra-hard ceramic
- Resists fine particle sliding abrasion from powder and gas
- 8:1 mix ratio by weight, 65 min working time
TONSAN TS216 is a grey two-component epoxy rebuilding putty reinforced with metallic carbide and ultra-hard ceramic. It protects against fine particle sliding abrasion and is used to repair pumps, fans (wind turbines), turbine shields, gas tubes and powder tubes. FEYANA supplies TONSAN TS216 in 500g and 10kg sets.
Key features
- Epoxy reinforced with metallic carbide and ultra-hard ceramic
- Resists fine particle sliding abrasion from powder and gas
- 8:1 mix ratio by weight, 65 min working time
- Temperature range -60～160℃
Technical data
| Color | Grey |
|---|---|
| Specific gravity (g/cm3) | 2.43 |
| Mix ratio by weight (A:B) | 8:1 |
| Mix ratio by volume (A:B) | 4:1 |
| Working time (min) | 65 |
| Compressive strength (MPa) | 112.0 |
| Tensile strength (MPa) | 32.0 |
| Shear strength (MPa) | 14.0 |
| Flexural strength (MPa) | 45.0 |
| Fully cured time (h) | 24 |
| Temperature range (℃) | -60～160 |
Applications
- Repairing pumps and fans (wind turbines)
- Turbine shields, gas tubes and powder tubes
Packaging: 500g/set (Order no. 221601); 10kg/set (Order no. 221603)
Data are typical values from the manufacturer’s literature. Contact us for the TDS/SDS and selection advice.
Contact FEYANA: WhatsApp/Zalo +84 988 641 591 – sales.00@feyana.com
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.