Ceiling Mounted Cassette (Round Flow) – FXFSQ-A/FXFQ-A VRV Indoor

Dual Sensors (*)
Dual sensors and individual airflow direction control automatically provide optimal control of airflow
(*) Applicable when sensing panel (BYCQ125EEF/EEK) is installed
(**) Apllicable when wired remote controller BRC1E63 is used

Auto Airflow Function (*)
– When human presence is not detected: With “Auto” airflow direction mode, flaps are controlled to deliver optimal airflow when the room is unoccupied
– When human presence is detected: When presence is detected, air direction is set to “Swing (narrow)” to deliver cool air to users.

Comfort and Energy Saving Preventing Overcooling (*)
Energy Savings – The temperature near the person is automatically calculated by detecting the temperature of the floor. Energy is saved because the area around the feet does not get too cold.
(*) Airflow direction should be set “Auto”

Sensing Sensor Function (*)
– Sensing sensor low mode (default: OFF): When there are no people in a room, the set temperature is shifted automatically. The system automatically saves energy by detecting whether or not the room is occupied. The set temperature is shifted automatically if the room is unoccupied
– Sensing sensor stop mode (default: OFF): When there are no people in a room, the system stops automatically (**). The system automatically saves energy by detecting whether or not the room is occupied. Based on preset user conditions, the system automatically stops operation if the room is unoccupied.
(*) Applicable when sensing panel (BYCQ125EEF/EEK) is installed
These functions are not available when using the group control system
User can set these functions with remote control
(**) Please note that upon re-entering the room, the air conditioner will not switch on automatically
To protect the machine, the standby system may operate temporarily.

Circulation airflow cools the entire room to deliver comfort that never feels cold
– Airflow effectively avoids blowing air directly on people
– Cool air moves down along the walls and to every corner of the room
– Comfort without cold air pockets at floor level
– Cools by airflow blocking out hot air near windows and walls.
(*) Applicable when wired remote controller BRC1E63 is used

Configurations of Circulation Airflow

Three Technologies That Achieved Circulation Airflow
1. Use of new wide flaps (straight): With new, larger flaps, a straighter trajectory for airflow was achieved.
2. Optimizing airflow angle (horizontally): The airflow was made more horizontal
3. Increased velovity in 2-way flow (strongly): Velocity increased by making 2-way flow. Powerful airflow was realized.

Comfortable air conditioning for all room layouts and conditions
Airflow direction can be individually adjusted for each air discharge outlet to deliver optimal air distribution
Individual airflow settings
– No individual setting (Auto airflow)
– Position 0 (Highest point)
– Position 1
– Position 2
– Position 3
– Position 4 (Lowest point)
– Swing
(*) Apllicable when wired remote controller BRC1E63 is used

Drain pan and drain water check
The condition of the drain pan drain water can be checked by removing the suction grille and drain plug

24mm diameter drain outlet
The drain outlet allows insertion of a finger or dental mirror for inspection of the internal cleanliness of the drain pan. Removal of the suction panel enables access

Auto grille panel (option)
Grille and air filter cleaning can be performed without need for a stepladder by lowering the grille